Disposable Mask Making Machine Semi Automatic type
1. The whole machine adopts aluminum alloy structure, which is more beautiful and sturdy.
2. High stability
3. Two output lines, high output
4. Fully automatic outer earband spot welding machine colleagues make the mask sheet and the external ear spot welding part, it can save labor, once the non-woven fabric raw material is used up in the production process, the machine can stop automatically.
Machine Component
Machine Name |
SIZE (L*W*H) m |
QTY |
Material Unwinding |
2.27x0.65x2 |
1 |
Mask Body Machine |
2.3x0.6x1.4Â |
1 |
Ear Attaching Machine |
1.9x0.7x1.87 |
2 |
Machine Technical Data
Production: 80-120PCS/MIN
Voltage: 220V 60Hz
Overall size: L6800*W3520*H2050mm
Mask size: 17.5*9.5cm
Power: 10 KW
Machine weight: 1700KGS
Â
Three layers of raw material report
Â
Main equipment and Description
Cutting cots |
we cover the two sides of the rubber  roller with chrome steel, so the rubber will not break from the side after  long time use. |
|
Traction rollers  |
we use silicone rubber material instead  of nitrile material. Silicone rubber material has good wear  resistance and will not crack. |
|
PLC Touch Screen  |
We use the FLEXEM brand PLC touch  screen. |
|
Strain control of nose mask  |
We use the mask nose strip with tension  controller. This device can avoid different length of nasal band. |
|
Nose beam feeding device  |
We use the nose strip directly into  the device, it can ensure that in the process of processing, the  nose strip can be inserted more  straight, so the finished mask will be flat and beautiful  |
|
Non-woven material sensors  |
We use non-woven raw material sensor,  once the raw material consumption, the machine will stop automatically  |
|
Raw material tension controller 1 Â |
We use the raw material tension controller  to avoid material clogging  |
|
Raw material tension controller 2 Â |
Our machine is equipped with two braking modes. one belt is urgent  and the other is screw fixed. You can  choose one or use it at the same time as you want  |
|
Raw material rectifying device  |
We use raw material correction equipment  to make material adjustment  |
|
Electronic control box  |
We use CHNT contactor and Schneider delay |
|
Inverter  |
We use INOVANCE frequency converter  |
|
Electrostatic eliminator  |
There is an electrostatic eliminator  in our machine. eliminate electrostatic on the surface of  the non-woven mask  |
|
Motor  |
our gear motor is new type, no need  refueling  |
|
Fan  |
We install the fan near the  ultrasonic horn to reduce the temperature of  the horn and extend the ultrasonic  life |
|
Ultrasonic welding system  |
There are two ultrasonic systems  in the mask body machine  |
Ear band spot welding part configuration sheet
Servo motor  |
We uses ervo motor(INOVANCE)to make  the machine work stable.To transfer the Whole mask convey  |
|
AC motor  |
FEITENG 7.5K 1 PC for finished mask  convey FEITENG 15K 2 PCS for ear-band  convey  |
|
Ear band spot welding machine  |
Two ear band spot welder computers  |
|
Photoelectric Eye  |
We Make SLCGQ,MIBBO, HURON brand  |
|
Solenoid valve  |
The solenoid valve is the AIRTAC  brand. 13PCS per set  |
|
Touch screen  |
MCGS Brand Touch screen  |
|
PLC Â |
Our PLC Brand: INOVANCE Â |
|
Servo drive  |
We use INOVANCE servo drive  |
|
Fan  |
We install the fan near the  ultrasonic horn to reduce the temperature of  the horn and extend the ultrasonic  life  |
|
Sound systems  |
One spot welding machine ,2 sets of ultrasonic system, we make  ultrasonic by ourselves, good quality and stable  |
|
Face mask finished product push device   |
We use a pneumatic mask on top of  our machine  |
|
Ear band piercing device  |
We have a convenient ear-band feeding  device  |
|
Independent conveyor belt  |
We install mask strip  |
|
Connecting the trachea  |
The machine has three parts of  connecting gas tube one is the earring connection part, the other two parts  are the earring machine  |
|
Ear band cutting device  |
Ear band cutting device  |
http://www.jdllntl.com/